A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Shift Interlock Solenoid: Service and Repair
Through VIN 8E_8A 002699
Shift Lock Solenoid
Removing
-
Remove cover for shift mechanism. Refer to => [ Selector Mechanism Cover ] See: Shifter A/T/Service and Repair/Removal and
Replacement/09LA Transmission/Selector Mechanism Cover.
-
Disconnect electrical harness connector on Shift Lock Solenoid (N110).
-
Release logs and remove the shift lock solenoid ( N110) - arrows -.
Installing
Install in reverse order, paying attention to the following:
-
Press shift lock solenoid into guide until it engages; operating lever - 2 - of solenoid must engage in locking lever - 1 - on shift mechanism.
-
Install cover for shift mechanism. Refer to => [ Selector Mechanism Cover ] See: Shifter A/T/Service and Repair/Removal and
Replacement/09LA Transmission/Selector Mechanism Cover.
-
Check shift lock solenoid (N110) function. Refer to => [ Selector Mechanism, Checking ] See: Shifter A/T/Service and Repair/Procedures/09LA
Transmission.