A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Removing dual-mass flywheel
Note:
^
Do not use an impact wrench or pneumatic wrench to remove bolts - B -: this would severely damage the dual-mass flywheel. Bolts - B - must
always be removed by hand.
-
Rotate flywheel - A - so that bolts - B - are aligned centrally behind holes - arrows -
-
When removing bolts - B -, make sure the bolt heads do not contact flywheel - arrows - because this would damage the flywheel when the bolts are
turned further.