A4 Quattro Sedan V6-2.8L (ACK) (1997)
Windshield: Service and Repair
Windshield, Installing
-
After performing preparatory work, cut tip off nozzle as shown.
-
Dimension -a- = 12 mm
-
Width of adhesive bead = 8 mm
-
Arrow indicates direction of application
NOTE: The cross-section thickness of the adhesive bead is determined by the dimension of the opening in the nozzle tip and the rate of application.
-
Apply adhesive sealing material (bead) around circumference of windshield as shown.
Distance between center of adhesive bead and edge of windshield is 8 mm.
-
Using two suctioned lifters, install windshield in windshield opening.
CAUTION!
Windshield must be installed within 10 minutes; otherwise, proper adhesion of the sealing material will be impaired.
-
Align windshield at sides.
Spacing between edge of windshield and roof frame must be 4 mm.
-
Press drip rail -1- into securing clips -3- starting at top and working downward.
Drip rail lip (arrow) must not extend beyond engagement line-radius of gap cover -5-.
4 - Self-adhesive spacers