A4 Quattro Sedan V6-3.0L (AVK) (2002)
-
Remove upper A-pillar trim - 1 - below upper B-pillar trim and unclip three clips - 3 -.
-
Remove upper A-pillar trim - 1 - to the rear.
-
Installing:
CAUTION: Always follow installation sequence for A-pillar trim.
-
Guide upper A-pillar trim - 1 - toward front between door rubber and side plate.
-
Guide trim retainer - 10 - into the proper clip.
-
Clip upper A-pillar trim - 1 - using three clips - 3 -.
-
Slide trim under upper B-pillar trim.
-
Ensure that clip and metal hook of head-level airbag adapter engage securely.
CAUTION: Ensure trim is held securely.
2
-
Screws, (2x)
-
Tightening torque 4 Nm
-
Self-locking
-
Replace after each disassembly
-
Threaded holes for screws must always be cleaned (for example, with thread cutter)
3
-
Clamps (Qty. 3)
4
-
Roof grab handle cover
5
-
Roof grab handle
6
-
Mounts
7
-
Groove
8
-
Gasket
-
After assembling trim, make sure seal is properly fitted.
9
-
Airbag label
10
-
Retainer