A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
-
Unscrew union nut using 3217 wrench.
-
Remove cover flange and sealing ring from fuel tank opening.
-
Disconnect fuel level display harness connector on inside of flange cover.
-
Disconnect return line on inside of cover flange (press unlatching buttons).
-
Insert 3307 wrench through fuel tank opening and place over the inner section of the surge housing.
-
Using 3307 wrench, turn inner section of surge housing approx. 15° to the left up to the stop and withdraw fuel pump assembly complete with the
inner housing section.
Cover flange and surge housing inner section, pre-assembling
If cover flange and supply unit were separated
-
Pre-assemble parts.