A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
-
Cut off nozzle on tube of sealant at the front mark (diameter of nozzle approximately 2 mm).
-
Apply a thin bead of sealant to edge between cylinder block and oil pan - arrow -
-
Apply a thin bead of sealant - arrow - to clean sealing surface of sealing flange, as shown in illustration.
^
Thickness of sealant bead: 2 to 3 mm.
Note: The sealant bead may not be thicker than 3 mm, otherwise excess sealant could enter the oil pan and clog the oil intake tube.
-
Lightly coat lower sealing surface of sealing flange with sealant - shaded area -.
Note: The sealing flange must be installed within 5 minutes of being applied with sealant.
-
Carefully push sealing flange onto locating pins on cylinder block.