A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
/Page-4061002.png)
-
Remove securing ring - A -.
-
Remove pulley - B -.
NOTE:
-
Replace securing ring -A-.
-
When installing securing ring -A-, take care not to bend it open more than necessary.
-
Ensure correct insertion of securing ring -A-. Bevelled side - C- faces away from compressor (flat side faces compressor).
-
Make sure securing ring is properly positioned in groove at compressor flange.
-
Clean compressor flange before sliding on pulley. Belt pulley must be easy to fit (without having to exert force).
