A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
Headlamp Bulb: Service and Repair
HID Low Beam Headlamp Bulb, Replacing
HID Low Beam Headlamp Bulb, Replacing - Through 10.04
CAUTION:
-
HIGH VOLTAGE!
-
Always disconnect negative (-) battery terminal prior to working on parts of HID headlamp components marked with yellow "HIGH VOLTAGE"
warning symbols.
-
The physical and mechanical properties of HID bulbs are very sensitive. Internal pressure of HID glass bulb may exceed 100 bar (in operation).
Bulb temperature may exceed 700 degrees Celsius.
-
Danger of explosion and burning.
-
The control modules for HID lamps must never be operated (headlamps turned on) without an HID lamp.
-
HID bulbs must only be operated (headlamps turned on) when installed in the headlamp housing.
-
Always wear safety glasses and gloves when removing and installing HID bulb.
-
Never look directly at an operating HID bulb. The UV emissions of an HID bulb are approximately 2.5 times that of a comparable halogen bulb..
Removing
-
Remove headlamp.
-
Remove screws - 1 - and - 2 -.
-
Release retaining clip - 3 - in direction of - arrow - and detach housing cover from headlamp housing.
-
Disconnect electrical connection - 3 -.
-
Release retaining clip - 1 - and remove HID headlamp bulb - 2 - from housing.
Faulty HID headlamp bulb disposal
Installing
Install in reverse order of removal, noting the following:
CAUTION: