A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
Radius Arm: Service and Repair
Guide Link
Guide link, removing and installing
Special tools, testers and auxiliary items required
Engine/transmission jack V.A.G 1383 A
Ball joint puller T40010
-
Torque wrench V.A.G 1332
Removing
-
Remove wheel trim; pull trim cap off light-alloy wheels (using puller in vehicle tool kit).
-
Remove wheel.
-
Secure brake disc with one wheel bolt.
-
If ball joint puller T40010 cannot be inserted, detach brake caliper and secure on body.
Note:
^
To prevent damage to brake line, attach brake line bracket to brake caliper HP-2 before securing brake caliper to body.
^
Secure brake caliper to body so that weight of brake caliper does not overload or damage brake hose or brake line.
-
Unscrew nut on guide link joint pin until it is flush with end of thread. Counterhold joint pin with 4 mm Allen key if necessary.
-
Press guide link joint pin of out of tapered seat using ball joint puller T40010.