A4 Quattro Wagon L4-2.0L Turbo (BPG) (2005)
-
Remove nuts - arrows -
Note:
^
A second technician is required to detach the selector mechanism under the vehicle.
-
Push retaining clips - 1 - and - 2 - inward, at the same time pushing the selector mechanism downward.
Note:
^
Do not bend or kink the selector lever cable.
Installing
Installation is performed in reverse sequence. Note the following:
-
Install selector lever cable.
-
Install new retaining clip - 1 - for selector lever cable on selector mechanism.
^
Installation position: The angled end of the retaining clip faces to the inside of selector mechanism.
-
Install locking cable.
-
Adjust locking cable.
-
Adjust selector lever cable.
-
Bolt driveshaft onto transmission.
-
Install exhaust system free of stress.
Tightening Torques