A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
‹› Tightening specifications, refer to => [ Striker Pin, Door Lock and Door Opener Actuating Link Assembly Overview ] See: Service and
Repair/Front Doors.
Installation is reverse of removal, but note the following:
-
Insert the nipple - 2 - in the door opener release lever - 3 - - bottom arrow -.
-
Rotate the nipple 90° - top arrow - and press the actuating link into the cable mounting bracket on the door lock - 1 - until it engages audibly.
-
Install the door lock cover. Refer to => [ Door Lock Cover ] See: Service and Repair/Front Doors/Door Lock Cover
-
Install the inner door panel cover. Refer to => [ Door Inner Panel Cover ]. See: Service and Repair/Front Doors/Door Inner Panel Cover
-
Install the door trim..
-
Install the lock cylinder. Refer to=> [ Lock Cylinder ]. See: Service and Repair/Front Doors/Lock Cylinder