A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Installing
Installation is in reverse order of removal, note the following:
‹› Tightening specifications. Refer to => [ Radiator and Coolant Fan Assembly Overview ] See: Radiator and Coolant Fan Assembly Overview.
-
Install air duct on the air filter housing intermediate flange.
-
On vehicles with Multitronic transmission, tighten the ATF lines.
-
Install charge air cooler. Refer to => [ Charge Air Cooler ] See: Powertrain Management/Fuel Delivery and Air
Induction/Turbocharger/Intercooler/Service and Repair/Charge Air Cooler.
-
Install bumper and front bumper cover.
-
Connect coolant hose with the connector on the coolant pipe => [ Connect the coolant hose and connector coupling
to the coolant pipe. ] See: Radiator and Coolant Fan Assembly Overview.
-
Fill with coolant. Refer to => [ Cooling System, Draining and Filling ] See: Service and Repair/Procedures.
‹› All of the coolant must be changed if the radiator was replaced.
-
On vehicles with Multitronic transmission, check the ATF level.