A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Fuse Block: Service and Repair
4-Pin Relay/Fuse Carrier with Threaded Connection
4-Pin Relay/Fuse Carrier with Threaded Connection
Observe notes on contact corrosion => [ Contact Corrosion ] See: Wiring Harness/Service Precautions.
Removing
-
Switch off ignition and remove ignition key.
-
Remove the driver side instrument panel cover.
-
Disengage the 3-pin relay/fuse carrier by pressing the retaining springs in direction of - arrow - and remove the relay/fuse carrier - 1 -.
-
Mark electrical wires - 1 - and - 2 - before removing so they can be installed later.