A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Release retaining hooks - arrows - carefully and remove the airbag spiral spring/return spring with slip ring (F138) - 2 - from steering column
switch module - 3 -.
-
Release electrical connectors on airbag spiral spring/return spring with slip ring (F138) - item 3 - by positioning the screwdriver at the retaining
hooks - 2 - and - 4 - as illustrated and carefully releasing the connectors - 1 - and - 5 - in direction of - arrow A -.
-
Remove airbag spiral spring/return spring with slip ring (F138) on the steering column switch module.
Installing
Install in reverse order of removal, observing the following:
-
Make sure all retaining hooks and connectors are engaged securely.
-
Install steering column trim.
-
Install steering wheel.
-
Install driver airbag.
-
The steering angle sensor must be adapted in "Guided Fault Finding" or "Guided Functions" after replacing the airbag spiral spring/return spring
with slip ring.
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).