A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Use special tool shown in illustration.
The special tool (T10065/3) must not come in contact with the roller body.
-
Press the triple roller joint onto the drive axle.
-
Install circlip.
-
Circlip must engage audibly, triple roller star must lie against circlip with no gap.
1
Pliers (commercially available)
-
Press 70 grams of joint grease, from repair set, into the reverse side of the triple roller joint.
-
Lightly grease the roller body.
Make sure roller body does not tilt!
-
Press the joint over the triple roller star using a plastic hammer.