A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
It must be aligned exactly because it cannot be aligned after driving on.
-
Drive cover on with a plastic hammer.
-
Clear away leaking sealing immediately.
Inner Constant Velocity Joint, 100 mm
-
Apply 40 grams of joint grease to CV joint through ball paths.
Inner Constant Velocity Joint, 108 mm
-
Apply 70 grams of joint grease to CV joint through ball paths.
Continuation for Both Constant Velocity Joints
-
Lubricate the contact surface on the cover.
-
Apply sealant -hatched area- to the clean surface in the inside of the cover. Sealant bead: Uninterrupted, apply dia. 2 to 3 mm in area of inner holes
- arrow -.
-
Use sealant.
-
Align new cover with screws - arrows - to screw holes.