A4 Quattro Wagon V6-3.0L (AVK) (2002)
-
Unscrew nut -1-.
Note: For vehicles with headlight range control, refer to Lighting and Horns, Head Lamp Sensor, Service and Repair.
-
Unscrew bolt -5- for ABS speed sensor.
-
Unscrew hex bolt -2-.
-
Pull wire of ABS speed sensor out of holder at wheel bearing housing.
-
Unscrew bolts -1- for brake caliper and remove brake caliper.
Note:
^
Use binding wire to attach brake caliper to body.
^
Never leave brake caliper hanging from brake hose.
-
Unscrew bolt -1-
-
Unscrew bolt -4-
-
Unscrew bolt -3-
Note: To avoid damaging joints of upper links, provide support e.g. using VAG 1383-A (engine and transmission lifter) to guard against
excessive rebound.
-
Loosen bolted joint between guide link / subframe.
-
If necessary, remove tunnel crossmember.
-
Unscrew hex bolts -1-.
-
Loosen hex bolts -2- and lower rear subframe.
-
Remove hex bolts of guide link.
-
Pull guide link out of subframe.
Note: Secure joints of track control link and guide link to body using binding wire to protect them from excessive bending.