A4 Sedan V6-3.2L (BKH) (2007)
-
Remove electrical wire - 3 - .
-
Remove screws - 2 - and - 4 - .
-
Unclip appropriate socket - 1 - .
NOTE: Refer to the applicable wiring diagram for exact identification of connections on connector station Wiring Diagrams .
Installing
Install in reverse order of removal, noting the following:
-
Reconnect battery. Required steps Audi A4 S4 . Required steps Audi RS4 .
Tightening torques
Connector point in plenum chamber electronics box to central tube for instrument panel : 3 Nm
Bolt connection for electrical wires : 9 Nm