A4 Sedan V6-3.2L (BKH) (2007)
/Page-1934002.png)
-
Place a punch on a side hole of pinion shaft seal and punch a small hole -arrow- to install a metal screw in shaft seal.
-
Install metal screw with large head in shaft seal hole.
-
Use a stable lever -1- with center notch -arrow- to install metal screw.
-
Position lever on metal screw.
CAUTION!
^
Lay an appropriate wood or plastic plate -2- between lever and transmission housing to prevent damage. The housing must not be
damaged.
-
Remove shaft seal.
