A4 Sedan V6-3.2L (BKH) (2007)
/Page-1989002.png)
‹› Loosen the clamping screw only approximately 1 turn. Do not remove.
‹› The clamping screw is only accessible in selector lever position " D".
‹› Selector lever must remain in the "D" position while the clamping screw is loose.
-
Loosen the quick release screws - 2 - and - 3 - and remove the rear noise insulation.
-
Remove the tunnel braces.
‹› The flex joint in the front exhaust pipe must not be bent more than 10 degrees, otherwise it may be damaged.
