A5 Quattro Coupe V6-3.2L (CALA) (2009)
‹› The seals - C - must be installed completely into both the coolant pipe connections - D - and - E - and the flange connections - B -.
-
Secure both coolant pipes - E - and - F - with the bracket - C - on the heat exchanger flange - H -.
‹› The screw - G - is used to help with the installation and must be removed after the bracket is installed.
-
Insert the screw - A - and the washer - B - and tighten the screw - A -.
Screw tightening specification - A - 2.5 Nm
-
Remove the screw - G -.
-
Check the position of the grommet - H - in the bulkhead for proper seating.
-
Properly connect the coolant hoses to the heat exchanger, pay attention to the marking.
A Supply hose from cylinder head