A6 Quattro Sedan V8-4.2L (ART) (2000)
/Page-2692002.png)
-
Turn crankshaft to TDC by hand. Markings -A- and -B- must be aligned.
-
Check position of camshafts: larger holes -arrow- in securing plates on camshaft sprockets must be in line with each other and facing inward. If
not, turn crankshaft one revolution.
-
Remove sealing plug -arrow- from left side of cylinder block.
-
TDC drilling in crankshaft must be behind sealing plug hole (feel to check).
-
Screw clamping bolt 3242 for crankshaft into sealing plug hole and tighten.
