A6 Quattro Sedan V8-4.2L (BVJ) (2007)
The measured distance and height must now be entered in the Diagnostic Operation System (VAS 5051A) in " millimeters".
Performing calibration
In Diagnostic Operation System (VAS 5051A), select "Guided Functions".
or
In Diagnostic Operation System (VAS 5051A), select "Guided Fault Finding".
-
Select the corresponding vehicle data in the "vehicle selection " menu.
-
Select "rear view camera system".
-
Select "functions".
-
Select "Calibration".
Further assistance during calibration procedure is given by Diagnostic Operation System (VAS 5051A).