A6 Quattro Wagon V6-2.8L (AFC) (1995)
-
Press in grooved ball bearing.
-
Install large circlip.
Installing new oil seal -B- with washer -A- onto punch 2005. Washer -A- thickness: 1.05 mm (0.041 in.)
-
Drive new seal in as far as stop.
-
Remove punch 2005 and washer.
-
Press in flange.
-
Install small circlip.
-
Install sleeve and tap on with plastic-headed hammer.
-
Install cover and flange and bolt tight.
-
Bolt bracket to final drive.
-
Carefully raise final drive and bolt to crossmember I.