A6 Quattro Wagon V6-2.8L (AFC) (1995)
/Page-2330005.png)
-
A = Commercial torque gauge, 0-600 Ncm (0-53 in lb)
-
B = Extension with 32 mm socket
CAUTION!
-
Slowly increase tightening torque and read friction torque value several times when doing so.
-
If the specified friction torque is exceeded, the spacer sleeve must be replaced and the adjustment repeated!
-
A sleeve that has been compressed cannot be reused.
These friction torques should be set
Locking Pinion Nut
-
Drift for caulking is inserted through the oil drain hole.
