A6 Quattro Wagon V6-3.0L (AVK) (2002)
-
Unscrew hex nuts -3- and -4-.
-
Remove hex bolts -5-.
-
Loosen hex bolt -6- until subframe can be removed.
Installing
-
Replace all bolts and nuts.
-
Insert carrier and thread hex bolts -5- and -6- partially.
-
Start hex bolt for suspension strut to track control link
-
Guide bearing and guide links into carrier.
-
Put bolts in the outside holes (arrows).
-
Before tightening the carrier, it must be fixed to the body using special tool 3393.