A6 Quattro Wagon V6-3.0L (AVK) (2002)
/Page-4637001.png)
Seat Belt: Service and Repair
Rear 3-Point Seat Belt (Avant), Removing and Installing
Rear 3-point Seat Belt (Avant), Removing And Installing
1
-
Belt tensioner
Removing
-
Remove rear seat bench.
-
Remove bolt - 7 -.
-
Remove luggage compartment side trim.
-
Take off noise insulation cap - 2 -.
-
Unclip belt tensioner igniter wire at lug - 4 -.
-
Disconnect connector - 8 - at belt tensioner.
-
Remove bolt - 3 - (1x).
-
Remove 3-point inertia-reel seat belt - 1 - with anti-twist element.
