A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-7302003.png)
1
Spacer
‹› To install, slide spacer onto hinge arm=> [ Spacer installation position ] until it engages.
‹› Before installing gas-filled struts, push wedge - 3 - in - direction of arrow - until it makes contact with roof - 4 - with light pre-tension.
2
Rear lid hinge axle
‹› Slide spacer sideways onto axle.
‹› When installed correctly, spacer must engage cleanly.
3
Spacer slide
‹› Must contact roof with pre-tension.
4
Roof
Spacer installation position