A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-7388002.png)
Service
Figure 3
Apply a protective foil (Part No. AKL-448- 030-05) to each end cap of the blind assembly.
Protective foil must be applied on both end caps of the blind assembly over the contact surface/chafe mark.
Warranty
When procedure applies to vehicles under warranty, use the table.
Required Parts and Tools
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.
