A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Release spreader clip - 3 - with Pry Lever 80-200.
-
Pry spring clamps - 1 - from body - arrows - with Pry Lever 80-200.
-
Disengage luggage compartment side trim from retaining hooks - 2 - and remove from luggage compartment.
Installing
Installation is reverse of removal, but note the following:
-
Install rubber seal lip over leading edge on luggage compartment side trim.
-
Install rear cross panel trim.
-
On vehicles with foldable rear seat backrests, install respective rear side airbag.
-
On vehicles with fixed rear seat backrests, install rear bulkhead trim.
-
Lay luggage compartment floor covering in luggage compartment.