A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Remove Assembly Device (T10122/1).
-
Install Pull Sleeve (T10122/2) with shaft seal - 1 - onto crankshaft.
-
Press the shaft seal in, evenly and flush, using Pressure Sleeve (T10122/3).
-
Remove Assembly Device (T10122/1).
-
Install Pull Sleeve (T10122/2) with shaft seal - 1 - onto crankshaft.
-
Press the shaft seal in, evenly and flush, using Pressure Sleeve (T10122/3).