A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Using rotating plastic brush, remove any sealant residue from sealing flange, cylinder block and upper part of oil pan.
-
Clean sealing surfaces so they are completely free of any oil or grease.
-
Cut tube nozzle at front marking (jet dia. approximately 2 mm).
-
Apply bead of sealant as illustrated to clean sealing surface of sealing flange.
^
The groove - arrow - of sealing surface must be completely filled with sealant.
^
Sealant bead must stand 1.5 to 2.0 mm above sealing surface.
Note:
^
Sealant bead must not be thicker than specified, otherwise sealant could get into oil pan and clog the oil pump screen.
^
The front sealing flange must be installed within 5 minutes of being applied with sealant.