A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-9168002.png)
-
Remove bolts - arrows - and remove wiper frame completely.
-
Disconnect electrical harness connector - 1 -.
-
Pry off wiper linkage - 1 - from ball head - arrow -.
-
Remove nut - 2 - and remove crank - 1 - from wiper motor.
-
Remove wiper motor from wiper frame - arrows -.
Installing
Installation is performed in reverse order of removal, noting the following:
-
Bolt wiper motor without crank on to wiper frame - arrows -.
-
Connect electrical harness connector.
