A6 Sedan V6-2.8L (AHA) (1998)
-
Press triple roller star and securing ring off from drive axle
-
T10065/4 special tool must not protrude on roller body
-
Pull off CV boot for triple roller star
-
Remove grease at splines of shaft
-
Check rollers and track for wear.
-
Clean shaft and housing
Triple Roller Joint AAR 3300 I, Assembling
Installation
-
Slide new CV boot onto shaft.
-
Press on securing ring -1- up to center of splines
-
Use special tools shown in illustration.