audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Power Door Lock Switch > < Hood Sensor/Switch (For Alarm)|Service and Repair
Page 1
background image

Underhood Lamp Switch: Service and Repair

Removing:

-

Remove plenum chamber cover in engine compartment by removing three screws.

-

Remove protective cover from contact switch -1-.

-

Remove screw -arrow- at contact switch -1- and remove switch.

-

Disconnect electrical connector -2-.

Installing:

-

Install in reverse order of removal.

Power Door Lock Switch > < Hood Sensor/Switch (For Alarm)|Service and Repair