A8 Quattro Sedan V8-4.2L (AUX) (2001)
Sunroof / Moonroof Weatherstrip: Service and Repair
Sunroof Panel Seal, Removing And Installing
-
Sunroof removed
Vehicles With Aluminum Sunroof Panel
-
Pull out seal - 1 - and remove adhesive residue.
-
Coat metal flange - 2 - on inside only using adhesive D 002 100.
NOTE: The panel seal must not be cut. Compensate for slight material excess by compressing the seal equally on both sides.
Vehicles with solar (e.g. glass) sunroof panel
-
Remove panel seal - 2 - from sunroof panel - 3 -.
-
Push new panel seal into sunroof panel - 3 - starting at rear of panel edge in center.
NOTE: Coat edge of panel with soapy water to facilitate installation of seal.