A8 Quattro Sedan V8-4.2L (BGK) (2006)
A - dial gauge extension 30 mm
-
Install the M8 x 45 bolt - B -.
-
Mount the dial gauge extension on the center of the (VW 385/17).
-
Set the dial gauge (3 mm measuring range) to 0 with 2 mm preload.
-
Lift the differential without rotating it in direction of - arrow -, then read the play on the dial gauge and write it down (example: 0.50 mm).
If it is necessary to repeat the measurement, then the differential must be turned 8 turns in both directions beforehand so that the tapered roller
bearings settle in.
Formula: Stotal = S2* + measured value + bearing preload
Example