A8 Quattro Sedan V8-4.2L (BGK) (2006)
/Page-3498002.png)
-
If this marking is not present, then mark in color the position of driveshaft flange - arrow A - to rear final drive - arrow B -.
-
Remove the bolts - 1 - (quantity: 6) from the rear CV joint.
-
Use the (T10172) and (T10172/5).
-
Disconnect driveshaft from rear final drive and tie up to the side - arrow -.
Attach the Driveshaft to the Rear Final Drive.
Installation is in reverse order of removal. Observe the following when doing so:
