A8 Quattro Sedan V8-4.2L (BVJ) (2008)
-
Using a screwdriver, pry out clamping strips - 5 - (Qty. 8).
-
Using a screwdriver, pry out lower clamping strips - 3 - (Qty. 5).
-
Fold cover and cushion - 1 - downward.
-
Disconnect connector - 4 -.
-
Remove cover and upholstery - 1 -.
‹› Installing
-
Install cover and upholstery - 1 - in reverse order of removal.
2 - Backrest heating element connector
3 - Lower clamping strips (Qty. 5)
4 - Harness connector of seat side bolster heating element
5 - Clamping strips (Qty. 8)
Backrest Cushion, Separating from Upholstery
CAUTION!
Observe safety precautions for working on airbags => [ Airbag Safety Precautions ] See: Restraint Systems/Air Bag Systems/Air
Bag/Service Precautions.
1 - Cover