A8L V8-4.2L (BFM) (2004)
Power Seat Motor: Service and Repair
Headrest Adjustment Motor, Removing and Installing
Headrest Adjustment Motor, Removing And Installing
1
-
Wire tie
2
-
Bolts
-
Qty. 2
3
-
Wire tie
4
-
Connector
5
-
Headrest adjustment motor
Removing
-
Remove seat.
-
Attach Fixture for seat repair VAS 6136 to Engine and transmission holder VAS 6095.
-
Attach front seat to Fixture for seat repair VAS 6136.
-
Remove upper backrest cover panel.
-
Remove lower backrest cover panel.
-
Unfasten wire tie - 3 -.
-
Disconnect connector - 4 -.
-
Unclip wire tie - 1 - from backrest frame.
-
Move wiring harness - 6 - aside.
-
Remove bolts - 2 - (2x).
-
Remove upper backrest adjustment motor - 5 - downward.
Installing
-
Install upper backrest adjustment motor - 5 - in reverse order of removal.
6
-
Wiring harness