A8L V8-4.2L (BFM) (2004)
-
Install bolts - 1 - through - 6 - as far as stop, do not tighten.
-
Tighten bolts - 1 - through - 6 - in specified sequence.
Tightening specification: 2.9 Nm.
-
After installing, check whether all bolt heads have made contact.
-
Install hydraulic unit. Refer to => [ Installing ] See: Antilock Brakes / Traction Control Systems/Hydraulic Control Assembly - Antilock
Brakes/Service and Repair/Removal and Replacement.