A8L V8-4.2L (BFM) (2004)
Harmonic Balancer - Crankshaft Pulley: Removal and Replacement
Vibration Damper
Removing
‹› Lock carrier is pulled toward the front. Refer to => [ Lock Carrier, Pulling Toward the Front ] See: Body and Frame/Lock Carrier/Service and
Repair/Procedures/Lock Carrier, Pulling Toward the Front.
‹› Ribbed belt is removed. Refer to => [ Ribbed Belt ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal
and Replacement/Ribbed Belt.
-
Remove the vibration damper from the crankshaft by removing the bolts - 1 -.
Installing
Installation is performed in the reverse order of removal, noting the following:
-
When installing, make sure that the notch - arrow - in the vibration damper aligns with the locating lug on the toothed belt gear.
Tightening Specifications