A8L V8-4.2L (BFM) (2004)
-
Rotate center control knob counterclockwise to move cursor on MMI screen downward until "Start download "is highlighted
-
Press center control knob to select highlighted entry and MMI screen will change to a screen reminding: not to use electrical consumers
-
Rotate center control knob counterclockwise to move cursor on MMI screen downward until "OK" is highlighted
-
Press center control knob to select highlighted entry and download process begins again
NOTE:
-
Progress of each component will be shown
-
Please wait until all devices have been initialized
-
This screen is displayed when all devices have been initialized
-
Rotate center control knob counterclockwise to move cursor on MMI screen downward until "Restart MMI" is highlighted
-
Press center control knob to select highlighted entry
-
Wait 2 minutes and MMI screen will eventually turn off and close itself
-
Proceed to Section D
Section D - MMI Update Verification
After passing disclaimer screen:
-
Press and hold SETUP and RETURN buttons until MMI screen changes
NOTE:
MMI screen must display "SW Update" in lower right corner
-
Press lower right control button to enter "SW Update" mode and MMI screen will change to "CD ROM" display
-
Rotate center control knob counterclockwise to move cursor on MMI screen downward until "CD ROM" is highlighted