A8L V8-4.2L (BFM) (2004)
-
Lubricate the bushing lightly with assembly paste (G 052 109 A2).
-
Insert the bushing - 1 - into the track control arm - 2 -.
-
Install the special tools as shown in the illustration.
‹› When installing, make sure the bushing does not tilt.
-
Press the bushing - 1 - into track control arm - 2 -.
-
Note the installation depth marking when installing - arrow -.
-
Check the rim offset of the bushing - 1 - in track control arm - 2 -.
Dimensions - a - and - b - must be identical.
-
If dimensions - a - and - b - are different, press the bushing - 1 - in more.
-
Install the track control arm. Refer to => [ Track Control Arm ] See: Service and Repair/Track Control Arm.