A8L V8-4.2L (BFM) (2004)
-
Remove the joint piece horizontally using the (VW 771).
Leave the joint piece in the (T40018).
-
Mark the installed position of the parts - 1 and 2 - with lines.
If they are not marked and are not reinstalled in their previously installed positions, noises may occur later during driving operation.
A water proof felt pen is well suited for applying the mark.
1
Axle shaft
2
Triple roller star
-
Remove the grease from the triple roller star and the joint piece using a lint free cloth.
-
Remove the securing ring.