A8L Quattro Sedan V8-4.2L (AKB) (2002)
Parking Brake Pedal: Service and Repair
Pedal Assembly, Overview
1. Butyl tape
^
Always replace
^
Acts as seal between pedal bracket and bulkhead
2. Pedal bracket
^
Removing and installing; Refer to pedal assembly
3. Insulation
^
Inserted in pedal bracket
4. Pipe for clutch master cylinder, 15 Nm
5. Accelerator pedal
^
Clip into pedal bracket
^
Delivered as replacement part with integrated bushing, bushing cannot be replaced
^
Removing and installing; Refer to pedal assembly
6. Circlip
^
Always replace
^
Install on shaft of mounting bracket
7. Circlip
^
Always replace
^
Install on pin
8. Brake pedal
^
Slide onto shaft of mounting bracket
^
To remove, mounting bracket must be loosened
^
Delivered as replacement part with integrated bushing, bushing cannot be replaced
^
Removing and installing; Refer to pedal assembly