A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-3395001.png)
Constant Velocity Joint: Service and Repair
Drive Axle, with 88 mm Outer CV Joint
Drive Axle, 88 mm Outer CV Joint
Assembly overview, refer to => [ Drive Axle Assembly Overview, 88 mm Outer CV Joint ] See: Service and Repair/Removal and Replacement/Rear
Suspension/Drive Axle Assembly Overview, 88 mm Outer CV Joint.
Special tools, testers and auxiliary items required
‹› Thrust plate (VW 401)
‹› Thrust plate (VW 402)
‹› Punch (VW 409)
‹› Thrust Disc (VW 412)
‹› Sleeve press tool (VW 522)
‹› Press block (40-204A)
‹› Assembly tool (T10065) can also be used instead of (40-204A).
‹› Adapter plates (2036/1)
‹› Press support - R&I wheel bearings (3144)
‹› Hose clamp pliers (VAG 1275)
‹› Torque wrench (40-200 Nm) (VAG 1332)
‹› CV joint boot clamp tool (VAG 1682)
‹› Assembly tool (T10065)
‹› Sealant
‹› Circlip pliers (commercially available)
Inner CV Joint, Servicing
Inner CV Joint, Removing
-
Secure the drive axle with protective covers in a vise.
-
Pry off cap with a screwdriver.
