A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-3395006.png)
-
Align the new cover - A - to the bolt holes.
It must be aligned exactly because it cannot be aligned after pressing on.
-
Press on the cap - A - using special tools shown in the illustration.
Flat steel in an appropriate size can be used instead of the (2036/1).
-
Position the CV joint boot in the outer groove - arrow 2 -.
Inner groove - arrow 1 - must remain visible "identifying groove" (for correct installation of the CV joint boot).
