Cabriolet V6-2.8L (AFC) (1995)
/Page-41002.png)
-
Remove screws (arrows) securing ECM to electronics box.
-
Remove ECM from electronics box and remove ECM connectors.
Installing
-
Ensure that ignition is switched OFF.
CAUTION!:
DO NOT connect ECM with ignition switched ON.
-
Connect ECM harness connectors to ECM.
-
Install screws (arrows) securing ECM to electronics box.
Brace
-
Carefully install brace -3- along with attached parts.
Central Electronics Box
-
Carefully install lower cover onto electronics box so that tabs engage slots.
