Cabriolet V6-2.8L (AFC) (1995)
29. Adjusting screw
-
Steering play, adjusting, refer to correct type found under Overhaul. See: Steering Gear/Service and Repair
Fig. 1 Routing to steering gear
1 in illustration = Return hose
2 in illustration = Pressure hose
-
When connecting lines to steering gear note specifications:
a in illustration = approx. 30±
b in illustration = approx. 5±
Fig. 2 Pressing off tie rod end
REMOVAL
NOTE: Brake booster must be removed when removing and installing steering gear.
-
Disconnect battery Ground strap.
-
Remove strut tower crossmember (arrows).
-
Pry cover off intake air silencer using screwdriver.